Low-Cost High-Speed Photography - Part 1





Find this and other photos HERE.

Project Features

Produces white light flashes for high-speed photography and multiple exposures
High flexibility / reconfigurability (menu controlled)
Low cost (no flash unit needed, mostly cheap parts)
Simple hardware
No recharging time as for conventional flash lights

Introduction
Some of the ideas I have take years until I actually put them into practice

Comments

Post a Comment

Popular posts from this blog

Earthing as Per Indian Standard IS 3043:1987

Image
Earthing is very important part in every electrical system below are earthing pits design which are self explanatory:- Earthing with copper plate:- GI earthing system:- Pipe earthing:- Above Pics describe how to design earthing pits in electrical systems as per Indian Standard IS 3043:1987
Read more

Electrical Contactors AC1, AC2, AC3, AC4

Image
Electrical Contactors Utilization Categories:- Electrical Contactors are categorized according to the current making and breaking values for contactors. This will depend on the following: The type of load to be controlled (Inductive load, Lighting load, Motor load, Resistive load, Capacitive load) The operating cycle conditions. For any applications there are different contactors available depending upon load application which every electrical engineer you must know before designing any systems.  You may have often seen the ratings described on contactor name plate depicting various parameters. One of most important to be considered are as described in this article.  AC1 - These type of contactors are used for Non-inductive or slightly inductive loads they are used for Heaters which are resistive loads. AC2 - These type of contactors are used in Starting of slip-ring motors AC3 – They are particularly used for Starting of squirrel-cage motors and switching o
Read more

Star Delta Starter and applications

Image
Motors up-to 7.5 KW are started using direct online starters but above 7.5 KW induction motors are started using Star-Delta Starters as if motors above 7.5 KW are started directly then there will be voltage disturbances in line due to large starting current surges. So let’s discuss how this Star-Delta Starter works. Working Principal of Star-Delta Starter: First of all you must know what Star and Delta connections are:- Star Connection or Wye Connections:- In Star connections,  Phase current= Line current and Phase voltage= Line voltage/  √3. This means that during starting voltage get reduced by factor 1/√3. So Torque also gets reduced by factor 1/3 as Torque is directly proportional to square of voltage. Current also get reduced by 1/ √3 in  induction motor if motor is Started in Star connections. If You want to know about Direct online starter first then click link here Delta Connections:- In Delta connections Phase Voltage = Line Voltage and  Phase current=  Line Current /  √3. Aft
Read more